My Huber K6 is not maintaining temperature during operation. What can I do to make sure my Huber is operating properly?

You are here:
< All Topics

The Huber K6 is capable of both heating and cooling. The unit is composed of two halves, a lower cooling bath and an upper heating element with a recirculation pump and controller.

There is a data cable that connects the two halves, enabling the controller to control both halves. Ensure this data cable is snugly secured.

Finally, there is a three-position switch on the lower unit that must be in the “II” position (the upper position) in order for the bottom unit to be controlled by the controller.

Table of Contents